:::

學術成果

:::
論文內容
論文分類碩士論文
學號 
姓名陳恆揚
標題(中)以載體嵌合技術改善造紙廢水活性污泥沉降性之研究
標題(英)Improvement of Settleability for Activated Sludge Treating Pulp and Paper Making Wastewater by Carrier Docking
指導教授江舟峰;章日行
畢業日期2004-01
附件檔案 
參考連結http://ir.lib.cyut.edu.tw:8080/handle/310901800/1724
摘要活性污泥程序是相當普遍的一種廢污水二級處理技術,但其污泥膨化(bulking)問題一直未能有效解決,過去研究著重改善系統的生物因子;本研究嚐試利用自行開發之光柵式沉降管柱(light-beam settling column),評估利用載體嵌合技術(carrier docking)改善造紙廢水活性污泥之沉降性,本研究著重與前期批次量筒實驗結果(蔡,2004)評比。 本研究首先進行中部某一造紙廢水活性污泥程序之系統分析,統計89年 11月至91年10月連續24個月的水質資料,顯示放流水溶解性COD日平均值為
參考文獻Ardern,E.and Locktt,W.T. “Experiment on the Oxidaron of Sewage without the aid of filter”, J. Soc.cham.Ind., vol.33,523,1122,(1914).
Thompson, G., Swain, J., Kay, M., Forster, C. F. “The treatment of pulp and paper mill effluent: a review”, Bioresource Technology 77 , pp. 275-286 (2000).
Metcalf and Eddy Inc. Wastewater Engineering: Treatment and Reuse, 4th , McGraw-Hill Book Co., New York (2003).
APHA, AWWA, WEF, Standard Methods for the Examination of Water and Wastewater, 20th Edition, 2710C Settled Sludge Volume, pp. 2-80 (1998).
Great Lakes-Upper Mississippi River Board of State Public Health and Environmental Managers, Recommended Standard for Wastewater Facilicties (1990).
Wanner,J. “Activated Sludge Bulking and Forming Control”,Technomic Publishing,Lancaster,PA.
Young, J. C. and Edwards, F. G. “Fundamentals of ballasted
flocculation reactions”, Annual Conf. Water Environment Federation,
Anaheim CA (2000).
Chi, T. W. “Analyzing activated sludge process performance data”, J. Environmental Systems, 25(2) pp. 185-194 (1996).
Abuzaid, N. S., Al-Malack, M.H., and El-Mubarak, A. H. “Separation of colloidal polymeric waste using a local soil”,Separation and Technology 13, pp. 161-169 (1998).
Andreasen, K., Agertved, J., Petersen, J.O., and Skaarup, H.
“Improvement of sludge settleability in activated sludge plants treating effluent from pulp and paper industries”, Water Science Technology 40 (11-12), pp. 215-221(1999).
Bidault, A., Clauss, F., Helaine, D., and Balavoine, C. “Floc
agglomeration and structuration by a specific talc mineral composition”, Water Science Technology 36 (4), pp. 57-68 (1997).
Hilligardt, D., and Hoffmann, E. “Particle size analysis and sedimentation properties of activated sludge flocs”, Water Science Technology 36 (4), pp. 167-175 (1997).
Clauss, F., Helaine, D., Balavoine, C., and Bidault, A. “Improving activated sludge Floc structure and aggregation for enhanced settling and thickening performances”, Water Science Technology 38 (8-9), pp. 34-44 (1998).
Levine, A.D., Tchobanoglous, G., and Asano, T.“Characterization of
the Size Distribution of Contaminants in Wastewater: Treatment and
Reuse Implications”, J. Water Pollut. Control Fed., 57, 7, 805-816
(1985).
Ng, W.J., Ong, S.L., and Hossain, F. “An algorithmic approach for system-specific modeling of activated sludge bulking in SBR”, Environmental Modelling & Software 15, pp. 199-210 (2000).
Piirtola, L., Uusitalo, R., and Vesilind, A. “Effect of mineral materials and cations on activated and alum sludge settling”, Water research 34 (1), pp. 191-195 (1999).
Saayman, G.B., Schutte, C.F., and LeeuWen, J.V. “The effect of chemical bulking control on biological nutrient removal in a full scale activated sludge plant”, Water Science Technology 34 (3-4), pp. 275-282 (1996).
Sarlin, T., Halttunen, S., Vuoriranta, P., and Puhakka, J. “ Effects of chemical spills on activated sludge treatment performance in pulp and paper mills”, Water Science Technology 40 (11-12), pp. 319-325 (1999).
Vansever, S., Bossier, P., Vanderhasselt, A., Beeckman, M., Zanden J. V. D., Weytjens, D., Mingneau, C., and Verstraete, W.“Improvement of activated sludge performance by the addition of nutriflok 50 S”
, Water research 31(2), pp. 366-371 (1997).
Youngchul, K., Wesley, O.P., and Paul G.C.“Control of activated sludge bulking by operating clarifiers in a series”, Water Science Technology 38 (8-9), pp. 1-8 (1998).
彰化銀行產業動態報導 研究發展處 (1981,05)
邱仁杰、歐陽嶠暉,「抑制活性污泥膨化的發展新趨勢」
國立中央大學環境工程學刊 第二期,第15-26頁,84年12月,中壢。
薛勝豐、李季眉,「以儲存消化現象控制污泥膨化」,第二十二屆廢水
處理技術研討會,中華民國環境工程學會,(1997)。
李公哲,「環境工程」國立編譯館,茂昌圖書有限公司,81年7月,四版
江舟峰,「造紙廢水活性污泥之沉降性研究」,研究報告,朝陽科技大學環境管理系專業服務中心 (1999年10月)。
卓伯全、廖述良、曾迪華、王建文、潘時正,「純氧曝氣活性污泥程序之回顧與評析」,國立中央大學環境工程學刊,六卷,十二期,12月,中壢(1999) ,第21-29頁。
歐陽嶠暉,「活性污泥處理法」,環工生物程序講義,中壢(1999) , pp.143-163。
江舟峰,「以載體混凝技術改善造紙廢水活性污泥之沉降性研究」,成
果報告,朝陽科技大學理工學院實務專題製作研究計畫,台中,(2001)。
江舟峰、紀子文、林正祥、王博以、陳立斌、陳美雲,「造紙廢水處理系統功能診斷與顯微特性研究」,朝陽科技大學環境管理系專題報告,朝陽科技大學,臺中(2001, 1)。
陳俊宏、彭文正、阮文昌、蔡志民、江舟峰,「工業廢水處理場能源稽核技術探討:以造紙廢水為例」,第二十六屆廢水處理技術研討會,中華民國環境工程學會,高雄,(2001)。
陳恆揚、江舟峰、蔡傑寧,「造紙廢水處理廠放流水質之變動研究:實
廠案例探討」,第二十八屆廢水處理技術研討會,中華民國環境工
程學會台中,(2003)。
蔡傑寧、江舟峰、陳恆揚,「以批次量筒實驗探討造紙廢水活性污泥
之沉降性」,第二十八屆廢水處理技術研討會,中華民國環境工程
學會,台中,(2003)。
江舟峰「以載體嵌合技術改善造紙廢水活性污泥之沉降性研究」,行
政院國家科學委員會,研究計畫書,中國醫藥大學環境醫學研究
所,台中,(2003)。
行政院環保署環境檢驗所,「水中化學需氧量檢測方法-密閉迴流滴
定法,NIEA W517.50B」,環境檢驗所1999年公告,(1999)。
行政院環保署環境檢驗所,「水中總溶解固體及懸浮固體檢測方法-
103℃~105℃乾燥,NIEA W210.56A」,環境檢驗所2003年公告。
台灣區造紙工業同業公會統計資料,(2004)。

活動花絮

IMG_0677.jpg95年畢業紀念冊95年畢業紀念冊夏令營99級畢業照團拍聖誕活動
cron web_use_log